Smaw Instructional Strategies On Skill Mastery Of Grade 9 Students At Gov. Feliciano Leviste Mnhs, Sy 2025-2026
DOI:
https://doi.org/10.5281/zenodo.21503323Keywords:
Improves instructional strategies on skill mastery, TVL-SHIELDED METAL ARC WELDINGNCII, competencyAbstract
This action research evaluated effective instructional strategies to enhance the skill mastery of Grade 9 Shielded Metal Arc Welding (SMAW) students at Gov. Feliciano Leviste Memorial National High School during School Year 2025–2026. Utilizing a descriptive research design, data were gathered from 70 Grade 9 SMAW students using a researcher-made questionnaire and analyzed through weighted mean and frequency distribution. The investigation focused on three primary instructional strategies—demonstration, peer teaching, and hands-on practice—alongside students' skill mastery across critical technical domains, including workplace safety, setting parameters, striking an arc, and welding position.
The findings revealed that safety achieved the highest weighted mean among skill mastery dimensions, while hands-on practice emerged as the most effective instructional strategy, providing learners with essential experiential and visual reinforcement. Conversely, striking an arc and peer teaching recorded the lowest mean scores, highlighting key operational areas requiring instructional reinforcement. Ultimately, the study concluded that combining structured hands-on execution with guided safety instruction significantly improves welding proficiency, task accuracy, and learner confidence in technical-vocational education. To address identified gaps, targeted enhancement initiatives—including Demonstration-Based Skill Clinics, Arc Striking Practice Drills, and Structured Peer Mentorship Programs—were proposed to elevate overall technical competence.
References
Commission on Higher Education. (2018). Policies, standards and guidelines for technical-vocational education and training (TVET) (CHED Memorandum Order No. 34, s. 2018).
Department of Education. (2016). K to 12 curriculum guide: Technology and livelihood education (TLE) – Industrial arts.
Department of Labor and Employment. (1978). Occupational safety and health standards: Rule 1100 – Gas and electric welding and cutting operations.
Febnesia, H., Iman, A., & Supriyatna, D. (2023). The influence of project-based learning on welding engineering expertise competency in the manufacturing industry. Journal of Vocational Education Studies, 5(1), 16–31. https://doi.org/10.12928/joves.v5i1.5674
Garcia, L., & Ramos, P. (2021). Enhancing technical skills through contextualized welding instruction. Philippine Journal of Industrial Education, 15(2), 55–63.
Jalinus, N., Syahril, Nabawi, R. A., & Arbi, Y. (2020). How project-based learning and direct teaching models affect teamwork and welding skills among students. International Journal of Innovation, Creativity and Change, 11(11), 220–235.
Jeffus, L. (2020). Welding: Principles and applications (9th ed.). Cengage Learning.
Kim, J., Lee, H., & Park, S. (2019). Environmental factors affecting welding quality. Welding Science and Technology, 12(2), 90–98.
Kumar, R., & Bhatia, A. (2021). A review on recent trends in welding of dissimilar materials. Journal of Manufacturing Processes, 64, 450–464. https://doi.org/10.1016/j.jmapro.2021.02.037
Kumar, S., & Singh, R. (2021). Challenges in welding training: A vocational education perspective. International Journal of Vocational and Technical Education, 13(3), 45–53.
Lukman, M., Aziz, M., & Harun, A. (2023). Impact of hands-on practice on welding skill mastery among vocational students. Journal of Technical Education and Training, 15(1), 67–78.
Lumanta, G. V., Manalo, E. V., & Zarsuelo, C. L. (2023). Improving the welding skills of Grade 11 SMAW students through PPMS (Project Plant Made of Steels) in Canda National High School. Journal of Vocational and Technical Studies, 4(1), 12–25.
Martinez, J., Wilson, R., & Carter, P. (2020). Peer learning in welding skills training. International Journal of Technical Education, 38(1), 75–88.
Mercado, M. D. (2025). Contextualized instructional strategies in technology and livelihood education and learners’ technical skills [Unpublished master's thesis]. Golden Gate Colleges.
Miller, J. (2020). Principles of arc welding: Techniques and applications. McGraw-Hill Education.
Ogunleye, O., Adeyemi, K., & Balogun, M. (2022). Competency development in SMAW: Integrating theory, simulation, and practice. International Journal of Vocational Training, 28(3), 213–227.
Patel, V., & Singh, A. (2020). Welding education challenges in developing countries. International Journal of Technical Education, 35(1), 72–81.
Presidential Decree No. 1096. (1977). Adopting a National Building Code of the Philippines thereby revising Republic Act Numbered Sixty-Five Hundred and Forty-One. https://www.officialgazette.gov.ph
Rahim, B., et al. (2024). Development of competency-based assessment model welding practices for vocational school students. TEM Journal, 13(1), 45–58. https://doi.org/10.12691/education-8-1-5
Republic Act No. 11058. (2018). An Act strengthening compliance with occupational safety and health standards and providing penalties for violations thereof. https://lawphil.net/statutes/repacts/ra2018/ra_11058_2018.html
Romadin, A., Nurhadi, D., & Yoto, Y. (2022). Implementation of work-based learning to increase technical competence in industrial arts. Journal of Vocational and Technical Education, 11(2), 88–96.
Santos, R. (2022). Integrating safety practices in technical-vocational education. Journal of TVET Research, 10(1), 34–42.
Srinatriyo, Y., Suhartadi, S., & Yoto, Y. (2023). Application of the problem-based learning model to improve students’ understanding of welding defect material. Paedagogia: Jurnal Pendidikan, 12(2), 431–446. https://doi.org/10.24239/pdg.Vol12.Iss2.444
Suresh, D., Raju, C., & Venkateswarlu, B. (2019). Optimization of MIG welding parameters for improving weld quality using Taguchi method. Materials Today: Proceedings, 18, 4094–4100. https://doi.org/10.1016/j.matpr.2019.07.340
Technical Education and Skills Development Authority. (2019). Training regulations for Shielded Metal Arc Welding (SMAW) NC I, NC II, and NC III.
Technical Education and Skills Development Authority. (2022). Skills training regulation for Shielded Metal Arc Welding (SMAW) NC I–III. https://www.tesda.gov.ph
Villanueva, A. C., & Del Rosario, J. D. (2020). Assessment of welding practices among local fabrication shops in Metro Manila. Philippine Journal of Industrial Technology, 25(1), 35–42.
Yabut, J. D. (2023). Strategies in teaching TLE in public secondary schools in the province of Oriental Mindoro [Unpublished master's thesis]. Golden Gate Colleges.
Zakariya, A., & Rofiq, Z. (2021). Development of competency-based assessment model welding practices for vocational school students. Journal of Physics: Conference Series, 1833(1), Article 012025. https://doi.org/10.1088/1742-6596/1833/1/012025
Zhang, L., Wang, Y., & Liu, X. (2020). Active involvement and feedback-rich environments in technical education. Academia Letters, Article 142. https://doi.org/10.20935/AL142
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.